Unlike traditional grafting tools, this tools are made of #65 high carbon steel double-edged shear blades and high-strength ABS plastic handles, which are pruned and grafted at the same time for durability. The oil on the blade's surface is designed to reduce contact with air and moisture, further protecting the blade from lubrication and rust.
Root stock and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing.
Using easily and fast. Grafting method than the traditional savings the time and effort
Blade can be replaced.
Use the pruner to cut useless branches from the plant
Materials: Carbon Steel, ABS and Aluminum
Cut grafting stocks diameter from 5mm/0.2" - 1.4cm/0.55"
Trimming blades thickness: 3mm/0.12"
Size: 22cm * 10cm / 8.66inch * 3.94inch
Grafting Tape Width: 2cm/0.79"
HOW TO USE
Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Use the pruner to cut useless branches from the plant.
The grafting tool with "V & U & Ω" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.